bolt是什么意思，bolt是什么意思，求各类螺丝名称的英文翻译...
bolt是什么意思
bolt的意思是： 1、n.(门窗的)闩，插销;螺栓;闪电 2、v.用插销闩上;能被闩上;用螺栓把(甲和乙)固定在一起;(马等受惊)脱缰 3、adv.突然地;像箭似地;直立地 bolt 读法 英 [bəʊlt] 美 [boʊlt] 短语： 1、roof bolt 顶锚 2、bolt connection 螺栓连接 3、bolt out 匆忙离开；脱口而出 扩展资料词语用法： 1、bolt的基本意思是指由于着急或慌张而急于离开某地,因此具有“奔,窜”之意,强调的是动作; 用于吃食物时则具有“狼吞虎咽”的意味。 2、bolt作“闩上”解时,其宾语多为门或窗之类的名词。 词汇搭配： 1、bolt down沿着?跑 2、bolt sb in把某人关在室内 3、bolt off飞跑 4、bolt sb out把某人关在门外 5、bolt together装配在一起
bolt是什么意思
bolt 英/bəʊlt/ 美/boʊlt/ n.(门窗的)闩，插销;螺栓;闪电;弩箭;一匹（布） v.用插销闩上;能被闩上;用螺栓把(甲和乙)固定在一起;(马等受惊)脱缰;跑开;狼吞虎咽;停止支持（某团体或政党）;过早结实 adv.突然地;像箭似地;直立地 第三人称单数： bolts复数： bolts现在分词： bolting过去式： bolted过去分词： bolted 1 He reminded her that he would have to lock and bolt the kitchen door after her. 他提醒她，在她走后他得把厨房的门上锁并闩上。 2 The farmer slides the bolt in place to keep the gate from swinging. 农夫推上门闩，使门不摇晃。
求各类螺丝名称的英文翻译
中文品名
Description in Chinese 英文品名
Desciption in English
圆锥销 Taper pins
圆柱销 Parallel pins
开槽圆柱头螺钉 Slotted cheese head screws
开槽盘头螺钉 Slotted pan head screws
单耳止动垫圈 Tab washers
开口销 Split cooter pins
开槽半沉头木螺钉 Slotted raised csk head wood screws
开槽半圆头木螺钉 Slotted round head wood screws
开槽沉头木螺钉 Slotted countersunk head wood screws
平垫 Plain washers
平垫（带倒角） Mediun washers
平垫 Plain washers
重型弹垫 Spring lock washers,tang ends
标准弹垫 Spring lock washers,square ends
鞍形弹垫 Single coil spring lock washers
弹簧止动垫圈 Curved spring washers
波形弹垫 Wave spring washers
T型方颈螺栓 T-head blots with square neck
T型双接头螺栓 T-head bolts with double nip
螺纹圆锥销 Taper pins with threaded end
T型头螺栓 T-head bolts
蝶型螺母（美制） Wing nuts America form
蝶型螺母（德制） Wing nuts germany form
蝶型螺母（美制） Wing screws America form
蝶型螺母（德制） Wing screws germany form
圆球型盖型螺母 Ball knobs
开槽带孔球面
圆柱头蚴钉 Slotted capstan screws
开槽长圆柱端
紧定螺钉 Slotted set srews with full dog point
开槽平端
紧定螺钉（半牙） Slotted set srews with chamfered end
小六角特薄细牙
螺母 Pip nuts with thread
外舌止动垫圈 External tap
小垫圈
(用于圆柱头螺钉) Washers for cheese head screws
方斜垫圈（U型） Square taper washers for
U-section
方斜垫圈（I型） Square taper washers for
I-sections
方垫圈 Square washers
开槽凹端紧定螺钉 Slotted set with cup point
六角薄螺母 Hexagon thin nuts
细牙六角薄螺母 Hexagon thin nuts
木螺钉专用垫圈 Rounds washers for wood constructions
密封帽 Sealing caps,push-in type
活节螺栓B型 Eye bolts form B
内舌止动垫圈 Internal tab washers
双耳止动垫圈 Washers with two taps
滚花高头螺钉 Knurled thumb screws with collar
开槽滚花高头螺钉 Slotted knurled thumb screws with collar
滚花高螺母 Knurled thumb nuts with collar
滚花薄螺母 Knurled thumb thin nuts
锁紧垫圈 Sealing washers
轴用弹性垫圈 Retaining rings for shafts(external),circlips
孔用弹性垫圈 Retaining rings for bores(internal),circlips
方头带垫螺栓 Square head bolts with collar
方头圆柱底端螺栓 Square head bolts with half dog point
方头带垫关圆底端
螺栓 Square head bolts with collar,half dog point
T型槽螺母 T-slot nuts
单头螺柱 Single end studs
地脚螺栓 Masonry bolts
带槽圆螺母 Slotted round nuts
端面带孔圆螺母 Round nuts with drilled holes in one face
开槽平端紧定螺钉 Slotted set screws with flat point
开槽锥端紧定螺钉 Slotted set screws with cone point
六角螺母 Hexagon nuts
方螺母-C Square nuts
六角头螺钉 Hexagon screws
六角头圆柱端
紧定螺钉 Hexagon set screws with full dog point
薄型方螺母-B Square nuts without bevel
(pressed nuts)
六角头木螺钉 Hexgon head wood screw
(coach screws)
吊环螺钉 Lifting eye bolts
吊环螺母 Lifting eye nuts
圆锥型槽销 Grooved pins,taper grooved
圆锥型槽销
（半槽） Grooved pins,taper grooved half length
平行槽销
（带倒角） Grooved pins,parallel grooved full length
前端凹槽槽销 Grooved pins,reverve grooved half length
中部凹槽槽销 Grooved pins,center grooved
圆头槽销 Grooved pins with round head
沉头槽销 Grooved pins with countersunk head
六角螺母棒 Turnuckles(center parts),made out of hexagon bar
花蓝螺栓 Turnuckles with eye bolt and hook bolt
弹性圆柱销 Spring pins,heavy type
组合式盖型螺母 Hexagon domed cap nuts
开槽圆螺母
(配合沟头扳手) Slotted round nuts for hook spammer
圆螺母（带插销孔） Round nuts with set holes
盘型弹簧垫圈 Disc springs
喉箍 Hose clamps
润滑油嘴
（旋扭头） Lubricating nipples,button head
管夹 Shackles for conduilts
U型螺栓 Stirrup bolts(U-bolts)
球面垫圈 Spherical washers,conical seats
圆柱销 Parallel pins
厚六角螺母 Hexagon nuts,1.5d
厚六角法兰面
螺母 Hexagon nuts,1.5d with collar
长六角螺母 Hexagon nuts,3d
外齿锁紧垫圈 External teeth lock washers
内齿锁紧垫圈 Internal teeth lock washers
外锯齿锁紧垫圈 External teeth serrated lock washers
内锯齿锁紧垫圈 Internal teeth serrated lock washers
开口挡圈 Retaining rings for shafts(E-rings),circlips
平键（A型） Parallel keys(form A)
半圆键 Woodruff keys
嵌环（支撑环） Thimbles
机器螺钉和垫圈
组合件 Screws and washers assemblies
自攻螺钉和垫圈
组合件 Tapping screws and washer assemblies
薄型带孔
内六角圆柱螺钉 Hexagon cocket head cap screws with hole,low head
大六角头螺栓 Hexagon head bolts with large head
(friction grip nolts)
大六角螺母 Hexagon nuts with large wideth across flat
(friction grip nuts)
大垫圈 Round washers for friction grip bolts
楔型方垫圈 Spuare taper washers for friction grip bolts on T-
六角法兰面螺母 Hexagon flange nuts
全金属六角锁紧螺母（2型） Prevailing torque type hexagon nuts,all metallic nuts
轻型弹性圆柱销 Spring pins,light type
重型弹性圆柱
销用垫圈 Washers for bolts with heavy type spring pinss
ISO公制螺纹螺钉（多种头型） Thread forming screws for ISO-metric thread
自攻自钻螺钉
（多种头型） Self-drilling tapping screws
开槽切削螺纹螺钉（多种头型） Thread cutting screws
十字槽切削螺纹螺钉（多种头型） Thread cutting screws cross recess
T型四爪螺母 Tee nuts with pronge
钢结构用六角头螺栓连接副 Hexagon head fitted bolts for steel structures
开槽盘头
自攻螺钉 Pan head tapping screws with slot
开槽沉头
自攻螺钉 countersunk flat head tapping screws with slot
开槽半沉头
自攻螺钉 Raised sountersunk oval head tapping screws with slot
六角头自攻螺钉 Hexagon tapping screws
圆柱头螺钉用
弹簧垫圈 Spring lock washers for screws with cylindrical heads
十字槽盘头
自攻螺攻 Pan head tapping screws with cross recessed
十字槽沉头
自攻螺攻 Countersunk flat head tapping screws with cross recessed
十字槽半沉头
自攻螺攻 Raised countersunk oval head tapping screws with cross
薄型内六角
圆柱头螺钉 Hexagon socket head cap screws with,reduced head
十字槽盘头螺钉 Pan head screws with cross recessed
钢结构用垫圈 Washers for steel structures
钢结构用
六角头螺栓 Hexagon head bolts for steel structures
内六角沉头螺钉 Hexagon socket coutersunk head screws
轴用钢丝挡圈 Roundwire snap rings for shafts
十字槽半沉头
木螺钉 Cross recessed raised countersunk head wood screws
十字槽圆头
木螺钉 Cross recessed round head wood screws
十字槽沉头
木螺钉 Cross recessed countersunk head wood screws
螺纹护套
(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking
大外径垫圈 Washers,outside diameter appro.3d
弹簧卡子 sping cotter for a bolt
平板螺栓 Belting bolts
(elevator bolts)
干壁钉
（墙板钉） Dry wall screws
环型螺母 Lifting nuts(eye nuts)
圆螺母用止退
垫圈 Tab washer for slotted round nuts
下一篇：没有了
